FAQ

Frequently Asked Questions

Is sealing pavers worth it in Florida?

Yes, for pavers that have faded, lost joint sand or started to grow green film. Unilock, a paver maker, says sealing deepens color, tightens the sand joints near the surface and helps guard against water, dirt and oil. It is not a fix for poor drainage, though. To see if yours are ready, ask for a free estimate.

How much does it cost to have pavers cleaned and sealed?

First Coast companies publish about $1.75 to $3.25 per square foot to clean, sand and seal, and one Duval County washing company says a job with failed sealer sits higher. A 700 square foot driveway lands near $1,225 to $2,275 on that range. For a number written for your own pavers, call (904) 872-8339.

How much does it cost to seal outdoor pavers?

Sealing alone can start lower than the full job. A Northeast Florida pressure washing company lists sealing from $1.90 per square foot and cleaning from $0.22, with the final price set by size, paver type and joint sand. Ask what each line of a quote includes. To compare quotes, ask for a free estimate.

How long do paver sealers last?

Plan on two to five years. One washing company calls two to three years typical for this area, and Unilock says owners of its pavers reapply every three to five years. Full sun, pool chlorine and storms that empty the joints push a coat toward the short end. To have a coat checked, call (904) 872-8339.

Can I seal my pavers if my Greenland subdivision has an HOA?

Most likely, but ask the association first. Greenland Road runs past many newer neighborhoods, and an HOA may want a say in a change that shows from the street. Moving from a natural look to a high gloss wet look is the kind of change to raise early. To talk through finishes, ask for a free estimate.

Do pavers near a creek or pond need extra care?

They need the same careful job, plus a plan for the wash water. Big Davis Creek and Julington Creek run through this part of Duval County, and damp ground keeps shaded pavers wet longer. Ask the contractor where rinse water will go. To raise it at the visit, call (904) 872-8339.

What time of year works for sealing pavers in Greenland?

Pick a dry week with mild temperatures. A Duval County washing company points to fall as a drier stretch before winter, and Unilock asks for clear skies for 24 to 48 hours before sealing and 50 to 90 degrees. Summer storms can move the date, so stay flexible. To plan a day, ask for a free estimate.

Should a new Greenland paver patio be sealed right away?

Not right away. Unilock says to wait 60 to 90 days, and Western Interlock says 30 to 60, so a freshly laid patio gets a rest before its first coat. Sealing too early can trap the white haze called efflorescence. Tell the contractor the install date when you ask for a free estimate, and the job can be timed to the paver maker's advice.